Again with the six rows forward eight rows ripped.

 The scarf is also coming along nicely, as it's my go to project if I'm watching a movie or need something almost mindless to work on. Then there's.... another needle parted ways and on the Sheepicorn socks to boot. I'm just getting to the heel gusset on those and the tip just folded and came off. So that has to wait until next month to get a new needle. Wish I had enough money to buy multiples of the sizes I need. Oh and I should get a new needle gauge as well. Mine is the old white plastic one that the writing is almost all worn off.

 

 

 

 

I also discovered another mistake...with the green glove cuffs. I somehow added in an extra stitch on both of them. That's an inch of knitting done and it goes all the way down to the cast on. So. I will have to pull them off the needles and restart. Sigh.

 

The pattern on the gloves calls for 16-18 sts for the thumb gusset, I saw another pattern that said 19 but it was a different pattern. I just knitted this to 19 stitches and it is way too loose. Going to have to take it back four or six rows. The length for the palm is fine, but the thumb gusset is horridly too big. So glad I have them separated and can stop the other glove where it is. I forget that this is supposed to fit snugly because it is supposed to have negative ease.

 

So glad I have them separated and can stop the other glove where it is. I forget that this is supposed to fit snugly because it is supposed to have negative ease.

So onward and upward, it's been cold and cloudy today, perfect weather for working on warm knitting.

Two steps forward, and five rows back

 I was chugging along on the gloves, working on the other projects then was looking at the gloves after starting another sequence after a knit row and saw an extra long float. Hmmph, okay that's about two rows back so put a stitch marker in it and start to tink back the rows, I then looked at it again and ....damn, it's a dropped stitch because now two more rows are loose.

This is turning out to be a problematic project. I have to unknit all the rows now and it's going to be at least three rows of slip stitch and one more row of plain knit. Hope I caught the wayward stitch, it's so hard to tell with the dark yarn. 

I am further along on the green set of gloves for my son, the issue is I'm using a joined set of cables for a nearly 47 inch long needle set. The other problem is, the join causes a stitch jam when I'm pulling it through. The colors on this one is more subtle and I had hoped to use another yarn for the slipstitch but couldn't figure out how to do that easily so.... just plain green which is okay. This yarn coordinates well with the yarn I used for his hat.

I am really loving this particular stitch though and am considering using it on a pair of winter sock/slippers. Maybe that aqua blue scratchy yarn that I can never finish a project with. It would be warm and cozy for socks and since I don't have a lot of sensation in my feet anymore, so it should work out. Just working the yarn is difficult. 

I am flat broke and wouldn't you know at least two yarn companies are having sales. Simply Sock Yarns and KP are both having sales or a promotion and I think another company is as well.

Now, if you have a sci fi geek in your house or are one, like I do, and specifically a Star Trek fan, these socks may be worth the effort to learn color work.

Star Trek Socks by Laura Hohman on Ravelry for free! I saw them being knitted by the Yarn Dragon (who is much more advanced than I am) and found the pattern. On the Ravelry page it shows someone had done it in white and pale rainbow colors which is wonderful! My sweetie only wears black socks and given the problems I'm having with the navy blue Hawthorn....no black. So, eventually, when I get the budget for more yarn and a few other projects are finished, these will be a possibility. The directions call for DPN's which is another thing I do not want to deal with again so I would use two circulars instead. Easier to manage and... would have to do them one at a time given having two yarns at a time being worked it would make doing two socks at a time even more frustrating. The pattern used Stroll solid from KP which I think would be okay for the main color but the contrast definitely would want something more colorful which would be something like Stroll Effects or Tonal.

I could go yarn shopping but am going to not get into it due to several other things going on with projects that need to be finished. Being a good girl and focusing on what needs to be done first. 

Progress is pursued

 I have both of the mitts going now, the second one is being worked on more to catch up to the first one, with the replacement needled. Here's the thing, I misremembered what size the needle was and got a US 2.5 (3 mm), I double checked and ... they're supposed to be a size 2. No wonder it was so tight initially! Well that and I was knitting entirely too tight.

 I only have about an inch more to go on the second one to start the thumb gusset and be caught up with the first one. I think the thicker cable is also keeping the stitches a bit larger and looser. Yes, that is a 40 inch ChiaoGoo Red Lace needle, if I had paused just a half minute longer I would have gotten the next size up so I could fit both of them on the same needle. It's working out fine the way it is.

Now... me being impatient and frustrated because I almost ordered the wrong size needle AND it wasn't delivered when expected because ... lack of lighting at the gate. That's something else entirely. But I decided I needed to start another project ... yes... I know.

 

I have had about a dozen of these balls of Italian sock yarn for years. It was from a 'moving/consolidation' of a fellow knitter. This was years and years ago but those are all my colors for sure and snagged the entire bag. Not knowing..what to do with them. Then I started working the yarn and every project as abandoned and frogged. It is not soft yarn at all. It's machine washable supposedly but feels like some of the scratchiest wool from an old sweater. It must have been just my hands being extra dry the other day because it's not so bad today but still not as soft as Merino superwash.

 I decided to start a pair of socks anyway but only work with it for an hour or so before my fingers start getting sore. The other thing is, it calls for size 3-4 needles and I do not have the right cables to go with that size. I did find a size 1 40" and thought, well it's going to be socks might as well be tight.

Yes indeed, they are a tight knit and I started with the 'Magic No Gauge' sock pattern but the increases were awful!

I had to double check the pattern but I was doing it right, double increases every other row but that is way too steep. It also started with only 16 stitches (eight on each needle) which makes for a very pointy toe.

When you have something that works, stick with it and don't try to improve on it. Of course because I'm knitting uber tight with smaller needles it rolls horridly and I also went for 68 stitches for final count instead of 64. The next step is, what stitch pattern to do for the foot and leg? I realized that the colors are reminiscent of water, and then thought of Pandora (Avatar) and now need to find something that works like a vine pattern or leaves or waves or something. Also hope I can change to a size 2 needle but will see what happens with that. I'm working about an inch more two more on the two just straight knit for strength in the toe while I research a possible lace pattern.

The Sheepicorn socks are also not abandoned, I work on those in the evening when I have my dark blue blanked on the bed and the lighting isn't as bright. It's been rainy and cloudy the last few days so only working on the darker colors when I'm at the desk with overhead lighting. Same with the Hiking Scarf because that is stupid simple but is getting long so I need room to sit up straight to work on it. 

More updates when they happen of course, nothing too exciting going on while projects progress.

So... decisions were made

 I realized I was not happy with the way the mitt was turning out, so I restarted the thumb gusset after frogging back. I then kept doing it in pattern and then it had two elongated stitches from a slipped stitch that didn't get picked up so I restarted.... and still was not happy and realized the increases were not even on the two sides.

 

 

 

 It was not turning out as neat and tidy as other gloves have knitted and that increase discrepancy.... not gonna put up with it so I frogged it back again. 

 

So I now have two cuffs started and just might put both on the same needle using a cable connector and restart, keeping the increases in between markers and keep the slip stitch pattern on the rest of the body but regular knit on the thumb and fingers. I compared my results with the actual pattern photo and there's was not as professional looking at all at the 'seam'.

 

Adjustments will be made and I will make these gloves! The pattern keeps my interest with the slip stitches just not with increases in the mix. So there will be a band of maybe three knit stitches when the increases start. 

The hats arrived at their destination and the boys were happy to have them. At least they were smiling when he sent me the picture. That's one reason why I want to get the gloves finished is to send them off as well in sort of coordinating colors to the hats.  I cast on with the lighter green Hawthorne thinking it would be easier if I used a lighter colored yarn but the needles and cables are already on the purple ones so I might as well just fix that problem and get them finished.

That's my update for now, ribbiting ribiting.....